web statistics
  • ELG-150-C2100 Mean Well LED Power Supply

Model No. - ELG-150-C Series

Max Output Wattage (W) - 150 Watts

Rated Current - 500mA, 700mA, 1050mA, 1400mA, 1700mA, 2100mA

Model No.

ELG-150-C500

ELG-150-C700

ELG-150-C1050

ELG-150-C1400

ELG-150-C1750

ELG-150-C2100

Output

Rated Current

500mA

700mA

1050mA

1400mA

1750mA

2100mA

Rated Power  

200VAC~305VAC

150W

149.8W

150.15W

149.8W

150.5W

151.2W

100VAC~180VAC

105W

105W

105W

105W

105W

105W

Constant Current Region

150 ~ 300V

107 ~ 214V

72 ~143V

54 ~ 107V

43 ~ 86V

36 ~ 72V

Open Circuit Voltage

315V

225V

151V

115V

94V

80V

Current ADJ. Range

Adjustable for A-Type only (via built-in potentiometer)

250 ~ 500mA

350 ~ 700mA

525 ~ 1050mA

700 ~ 1400mA

875 ~ 1750mA

1050 ~ 2100mA

Current Ripple

5.0% max. @rated current

Current Tolerance

±5.0%

Auxiliary DC Output

Nominal 15V(deviation 11.5~15.5V)@0.4A for BE-Type only

Set Up Time

1600ms/115VAC 500ms/230VAC

Input:

Voltage Range

100 ~ 305VAC 142 ~ 431VDC

(Please refer to "STATIC CHARACTERISTIC" section)

Frequency Range

47~63Hz

Power Factor (Typ.)

PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load

(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

Total Harmonic Distortion

THD< 20%(@load≧50%/115VC,230VAC; @load≧75%/277VAC)
(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

Efficiency (Typ.)

92%

92%

92%

91%

91%

91%

AC Current (Typ.)

1.7A / 115VAC 0.9A / 230VAC 0.7A/277VAC

Inrush Current (Typ.)

COLD START 65A(twidth=485μs measured at 50% Ipeak)/230VAC; Per NEMA 410

MAX. No. of PSUs on 16A
CIRCUIT BREAKER

3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC

Leakage Current

<0.75mA / 277VAC

No Load/Standby Power

Consumption

No load power consumption <0.5W for Blank / A / Dx / D2-Type

Standby power consumption <0.5W for B / DA-Type

Protection:

Short Circuit

Hiccup mode, recovers automatically after fault condition is removed

Over Voltage

320 ~ 360V 230 ~ 265V 155 ~ 180V

128 ~ 150V

96 ~ 106V

82 ~ 92V

Shut down o/p voltage, re-power on to recover

Over Temperature

Shut down o/p voltage, re-power on to recover

Environment:

Working Temp.

Tcase=-40 ~ +90℃(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)

Max. Case Temp

Tcase=+90℃

Working Humidity

20 ~ 95% RH non-condensing

Storage Temp., Humidity

-40 ~ +80°C, 10 ~ 95% RH

Temp. Coefficient

±0.03%/°C (0 ~ 60°C)

Vibration

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

Safety & EMC

Safety Standards

UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.1, GB19510.14; IP65 or IP67 approved

Dali Standards

Compliance to IEC62386-101, 102, 207 for DA-Type only

Withstand Voltage

I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC

Isolation Resistance

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH

EMC Emission

Compliance to EN55015,EN61000-3-2 Class C (@load≧60%) ; EN61000-3-3; GB17743, GB17625.1

EMC Immunity

Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV)

Others:

MTBF

1098.95K hrs min. Telcordia SR-332 (Bellcore) 308.6Khrs min. MIL-HDBK-217F (25℃)

Dimension

219*63*35.5 mm (L*W*H) 

Packing

0.95Kg; 16pcs / 16.0kg / 0.77CUFT
Electrical Specifications
Input Voltage NA
Model Type C-Type
Number of Outputs 1
Output Voltage NA
PDF Specs View Spec Sheet
Wattage 150
General
Dimmable Dimming
Industry Aliases new

ELG-150-C2100 Mean Well LED Power Supply

  • Brand: Mean Well
  • Product Code: ELG-150-C2100
  • Availability: Call for Availability
  • $47.70

  • Ex Tax: $47.70

©2024 Peak to Peak Power, Inc. All Rights Reserved. Marketing by Digital Lightbridge.