LED Power Supply Comparison Chart

Family PFC (Note 1) AC Input Range
(VAC)
Potted CC or CV IP Rating Dimming (Note 2) V°/I° ADJ Max Eff. Warranty

Safety Rating/ 

 Remark

Series Name Type Single Stage Two Stage
HLG-40H / HLG-60H / HLG-80H / HLG-120H / HLG-150H / HLG-185H /
HLG-240H / HLG-320H
A   90-305 C.V. + C.C. 65   95.0% 5 *UL8750 
240H: UL1012
UL60950-1 
B 67 3 in 1  
C
(240W/320W only)
   
Blank 67    
D 67 Timer  
HVG(C)-100 / HVGC-150 A   180~480 (528) C.V + C.C 65   91.0% 5 *UL8750 
B 67 3 in 1  
D (option) 67 Timer  
HSG-70     90~305 C.V + C.C 65   90.0% 3 *EN61347-1, *EN61347-2-13 
CLG-150 A   90~295 C.V + C.C 65   91.0% 3 *UL60950-1
UL1012
UL8750 
B 67    
C    
Blank 67    
CLG-100     90~295 C.V + C.C 67     88.5% 3 *UL8750
UL879
UL1310 
CLG-60     90~295 C.V + C.C 67     89.0% 3 *UL8750
UL879
UL1310 
CEN-60 / CEN-75 / CEN-100     90~295   C.V + C.C 66   91.0% 3 * UL8750
UL879 
LDV-185     180~295 C.C 67 Timer
(D-Type)
  88.0% 3

Multiple Channel C.C Output / 

*UL8750

ULP-150     90~295 C.V     93.0% 3 U-Bracket / 
*UL8750 
HLN-40H / HLN-60H / HLN-80H A   90~305 C.V + C.C 64   91.0% 3 *UL8750 
B 3 in 1  
LPF-16 / LPF-25 / LPF-40 / LPF-60 / LPF-90 D (Optional)   90~305 C.V + C.C 67
(LPF-16)
3 in 1   90.5% 3 * UL8750
Blank    
PLN-100     90~295   C.V + C.C 64   90.0% 2 *UL8750
UL879
UL1310 
PLN-30 / PLN-45 / PLN-60     90~295   C.V + C.C 64   89.0% 2 *UL8750
UL879
UL1310 
PLN-20     90~277   C.V + C.C 64   83.5% 2 *UL8750 
PLC-100     90~264   C.V + C.C     90.0% 2

Terminal Block I/O / 

*UL1310

PLC-30 / PLC-45 / PLC-60     90~264   C.V + C.C     89.0% 2 Terminal Block I/O / 

*UL1310

PCD-16 / PCD-25 / PCD-40 / PCD-60 A   90~264
(Half)
C.C 30 AC Phase Cut   87.0% 3  *UL8750
B 180~295
PLD-16 / PLD-25 / PLD-40 / PLD-60     PLD-16/40/60
A:90~135
B:180~295

(Half)
C.C 30     88.0% 3 * UL8750
PLD-25: 90~295
LCM-40 / LCM-60     180~295   C.C 20 0~10Vdc & PWM   90.0% 3

I° Level Selectable in one power unit

*UL8750

LCM-40DA / LCM-60DA DALI & Push DIM
PLP-20 / PLP-30 / PLP-45 / PLP-60     PLP-20: 90~277   C.V + C.C     89.0% 2 PCB Type/
*UL8750 
PLP-30/45/60: 90~264
HLP-40H / HLP-60H / HLP-80H     90~305   C.V + C.C   3 in 1 90.5% 3 PCB Type/
*UL8750 
ELN-30 / ELN-60       90~264   C.V + C.C 64 1~10Vdc or PWM 88.0% 2 *UL1310 
LPV-20 / LPV-35 / LPV-60 / LPV-100       90~264 C.V 67     89.0% 2

 UL1310:(Except LPV-60-5 & LPV-100

UL879:
(Except LPV-35/100 & LPV-60-5)

LPH-18       180~264 C.V 67     89.0% 2 *EN60950-1 
LPL-18       90~132 C.V 67     89.0% 2 *EN60950-1 
LPC-20 / LPC-35 / LPC-60       90~264 C.V 67     87.0% 2

 UL1301,

UL879
(LPC-20 only)

LPHC-18       180~264 C.V 67     87.0% 2 UL1310 
LPLC-18       90~132 C.V 67     87.0% 2  UL1310
APC-12 / APC-16 / APC-25 / APC-35       90~264
(16W/35W Half)
C.V 30     84.0% 2 UL8750 
APV-12 / APV-16 / APV-25 / APV-35       90~264
(16W/35W Half)
C.V 30     84.0% 2 UL8750 
Note 1

Single-Stage PFC : No hold-up time and higher Ripple & Noise. Not to use in regions with unstable utility status is highly recommended. ( For C.V mode operation, please refer to the application Q&A on MEANWELL LED website

Two-Stage PFC: Longer hold-up time and lower Ripple & Noise. Suitable for LED Lighting and general industrial applications

Non-PFC : PFC<0.6 and target at regions where PF compliance is not required

Note 2 3-in-1 dimming: 1~10Vdc, PWM signal, or resistance. Timer: Timmer Dimming function.
Please contact Peak to Peak Power/LED, Inc. for Details.

 

*Check Full Specification Sheet for UL Listing as series models can vary.